Purpose: For cables and conductors with Cu-strands without longitudinal loading, the cable diameter may not occupy more than 95% of the cross-section of the gland. Suitable for the connection of earthing conductors. For higher loads, we recommend the more robust DIN tubes, e.g. KU-ZE-V.
Voltage: up to 1 kV;
Material: electrotechnical copper;
Surface: electrochemically tinned.
Recommended tools for pressing:
HN 1 0,25-10mm²
HN 5 10-16mm² ;
K 05 6-50 mm²;
K 06 10-120 mm²;
K 09 25-150 mm²;
TN 70 SE 10-70 mm²;
TN 120 SE 10-120 mm².
Special non-DIN dies are required for pressing this type of acorn.
Name | Conductor cross-section, mm² | Conductor diameter, mm (rm/sm) | Conductor diameter, mm (re) | D, mm | d, mm | l, mm |
---|---|---|---|---|---|---|
1.5 KU-L-KR | 0.25-1.5 | 1.4 | 1.0 | 3.2 | 1.6 | 15 |
2.5 KU-L-KR | 1.5-2.5 | 2.0 | 1.5 | 3.9 | 2.3 | 15 |
4 KU-L | 4-6 | 3.0 | 2.5 | 5.6 | 3.6 | 22 |
6 KU-L | 6 | 3.0 | 2.75 | 6.5 | 3.5 | 25 |
10 KU-L | 10 | 4.1 | 3.25 | 7.0 | 4.5 | 30 |
120 KU-L | 120 | 12.5-13.5 | 19.5 | 15.0 | 65 | |
185 KU-L | 185 | 15.8-16.8 | 24.0 | 19.0 | 80 | |
240 KU-L | 240 | 17.8-19.2 | 26.0 | 21.0 | 90 |
Other sizes on request (KU-L long, KU-L-KR short).
Designations used: rm-round polyhedron; sm-sectoral polyhedron; re-uniform round monolith; se-uniform sectoral monolith.