Gerhard Petri Vilnius UAB

Nexans
e-paslaugos

Simplified copper lugs (tubular)

Purpose: For cables and conductors with Cu-strands without longitudinal load, the cable diameter may not cover more than 95% of the cross-section of the nozzle. Suitable for connection of earthing conductors. We recommend the more robust DIN-standard lugs for higher loads, e.g. KU-V.
Voltage: up to 1 kV;
Material: electrotechnical copper according to DIN 40500;
Surface: electrochemically tinned.
KU-L: without inspection hole;
KU-L-S: with a pilot hole.
Recommended tools for pressing:
HN 5 (10-16 mm²);
K 05 (6-50 mm²);
K 06 (10-120 mm²);
K 09 (25-150 mm²);
TN 70 SE (10-70 mm²);
TN120 SE (10-120 mm²).




    Name Conductor cross-section,  mm² (re/rm/sm) Conductor diameter (rm/sm)/re, mm DIN 48201/1 D, mm d, mm a, mm l, mm b, mm Fixing screw M, mm
    1.5×4 KU-L 1.5 3.3 1.8 6.0 13.0 6.5  4.3
    1.5×5 KU-L 1.5 3.3 1.8 6.0 13.5 7.5  5.3
    1.5×6 KU-L 1.5 3.3 1.8 6.0 14.0 9.0  6.4
    2.5×4 KU-L 2.5 4.2 2.4 6.0 14.0 7.5  4.3
    2.5×5 KU-L 2.5 4.2 2.4 6.0 14.0 8.5  5.3
    2.5×6 KU-L 2.5 4.2 2.4 6.0 19.0 9.5  6.4
    4×4 KU-L 4 6.0 3.5 8.0 17.5 8.0  4.3
    4×5 KU-L 4 6.0 3.5 8.0 19.0 9.0  5.3
    4×6 KU-L 4 6.0 3.5 8.0 18.5 11.0  6.4
    4×8 KU-L 4 6.0 3.5 8.0 21.5 14.0  8.4
    6×5 KU-L 6 3.0/2.75 6.5 3.5 9.0 21.0 11.4 5.0
    6×6 KU-L 6 3.0/2.75 6.5 3.5 9.0 21.5 11.4  6.0
    6×8 KU-L 6 3.0/2.75 6.5 3.5 9.0 23.0 13.0  8.0
    6×10 KU-L 6 3.0/2.75 6.5 3.5 9.0 25.0 16.0  10.0
    10×6 KU-L 10 4.1/3.55 7.0 4.5 10.0 22.0 11.5 6.0
    10×8 KU-L 10 4.1/3.55 7.0 4.5 10.0 23.5 14.5  8.0
    10×10 KU-L 10 4.1/3.55 7.0 4.5 10.0 26.5 18.0  10.0
    10×12 KU-L 10 4.1/3.55 7.0 4.5 10.0
    16×6 KU-L 16 5.1/4.50 8.5 5.5 12.0 26.0 13.0 6.0
    16×8 KU-L 16 5.1/4.50 8.5 5.5 12.0 26.0 14.0  8.0
    16×10 KU-L 16 5.1/4.50 8.5 5.5 12.0 29.0 17.0  10.0
    16×12 KU-L 16 5.1/4.50 8.5 5.5 12 30 20.0  13.0
    25×6 KU-L 25 6.3 (5.6-6.5 pagal VDE 0295) 10.0 7.0 14 28 14.0 6.5
    25×8 KU-L 25 6.3 (5.6-6.5 pagal VDE 0295) 10.0 7.0 14.0 30.0 16.0 8.0
    25×10 KU-L 25 6.3 (5.6-6.5 pagal VDE 0295) 10.0 7.0 14.0 32.0 18.0 10.0
    25×12 KU-L 25 6.3 (5.6-6.5 pagal VDE 0295) 10.0 7.0 14.0 20.0 20.0 13.0
    35×6 KU-L 35 7.5 (6.6-7.5 pagal VDE 0295) 12.0 8.5 17 32 18.0 6.5
    35×8 KU-L 35 7.5 (6.6-7.5 pagal VDE 0295) 12.0 8.5 17.0 32.0 18.0  8.0
    35×10 KU-L 35 7.5 (6.6-7.5 pagal VDE 0295) 12.0 8.5 17.0 35.0 18.0  10.0
    35×12 KU-L 35 7.5 (6.6-7.5 pagal VDE 0295) 12.0 8.5 17.0 37.0 21.0  13.0
    50×8 KU-L 50 9.0 (7.7-8.6 pagal VDE 0295) 14.0 10.0 20.0 38.0 21.0 8.0
    50×10 KU-L 50 9.0 (7.7-8.6 pagal VDE 0295) 14.0 10.0 20.0 39.0 21.0  10.0
    50×12 KU-L 50 9.0 (7.7-8.6 pagal VDE 0295) 14.0 10.0 20.0 43.0 21.0  13.0
    70×8 KU-L 70 10.5 (9.3-10.2 pagal VDE 0295) 16.5 12.0 21.0 41.0 22.0 8.0
    70×10 KU-L 70 10.5 (9.3-10.2 pagal VDE 0295) 16.5 12.0 21.0 41.0 22.0  10.0
    70×12 KU-L 70 10.5 (9.3-10.2 pagal VDE 0295) 16.5 12.0 21.0 41.0 22.0  13.0
    95×8 KU-L 95 12.5 (11.0-12.0 pagal VDE 0295) 18.0 13.5 24.0 48.0 25.0 8.0
    95×10 KU-L 95 12.5 (11.0-12.0 pagal VDE 0295) 18.0 13.5 24.0 48.0 25.0  10.0
    95×12 KU-L 95 12.5 (11.0-12.0 pagal VDE 0295) 18.0 13.5 24.0 49.0 25.0  13.0
    120×8 KU-L 120 14.0 (12.5-13.5 pagal VDE 0295) 19.5 15.0 26.0 52.0 29.0 8.0
    120×10 KU-L 120 14.0 (12.5-13.5 pagal VDE 0295) 19.5 15.0 26.0 52.0 29.0  10.0
    120×12 KU-L 120 14.0 (12.5-13.5 pagal VDE 0295) 19.5 15.0 26.0 52.0 29.0  13.0
    150×10 KU-L 150 15.7 (13.9-15.0 pagal VDE 0295) 21.0 16.5 29.0 55.0 31.0 10.0
    150×12 KU-L 150 15.7 (13.9-15.0 pagal VDE 0295) 21.0 16.5 29.0 55.0 31.0  13.0
    150×16 KU-L 150 15.7 (13.9-15.0 pagal VDE 0295) 21.0 16.5 29.0 57.0 31.0  17.0
    185×10 KU-L 185 17.5 (15.8-16.8 pagal VDE 0295) 24.0 19.0 30 65.0 35.0 10.5
    185×12 KU-L 185 17.5 (15.8-16.8 pagal VDE 0295) 24.0 19.0 30 65 35  13.0
    185×16 KU-L 185 17.5 (15.8-16.8 pagal VDE 0295) 24.0 19.0 30 65 35  17.0
    240×12 KU-L 240 17.8-19.2 26.0 21.0 35 76 38 13.0
    240×16 KU-L 240 17.8-19.2 26.0 21.0 35 72 38  17.0

    Other sizes on request. This type of lug requires non-DIN special dies for pressing. Designations used: rm-round multi-conductor; sm-sector multi-conductor; re-conductor single-conductor round monolith; se-conductor single-conductor sector monolith.